Haylou GT7 Manual

Haylou GT7 Manual English Haylou GT7 Earbuds Manual Instructions Haylou GT7 Pairing Haylou GT7 Reset Touch Controls Charging Case Warranty User Manual Guide

by

Haylou GT7 Manual

Re-Checking Earbuds Features and Specs: Haylou GT7

Haylou GT7 True Wireless earbuds User manual

Haylou GT7 Reset

How to Reset Haylou GT7

Factory Setting

  1. Put the earbuds back into the charging case and keep the charging case fully charged
  2. Then long touch the earbuds MFB buttons for 10S to reset Haylou GT7
  3. Clear phone pairing record “Haylou GT7”
    then turn off and complete the connection again
  4. If all success, Haylou GT7 Reset steps complete!

Troubleshooting

  1. One of the earbuds is mute:
    Try to put the mute earbud into the charging case and then take it out
    If the problem is still not solved after the above operation, try the reset steps;
  2. The earbud cannot be charged
    Check whether the charging case has sufficient power
    Wipe the charging contacts with a dry cloth or cotton swab
  3. The earbud cannot automatically disconnect from the mobile phone
    Check whether the charging case has sufficient power. The earbud will not power off if the case is out of power and will not disconnect from the mobile phone

Haylou GT7 Pairing

How to pair Haylou GT7

  1. Take two Haylou GT7 earbuds out from the charging case simultaneously, they will pairing with each other
  2. open device Bluetooth and search for “Haylou GT7” finally click it to
    complete the connection
  3. If paired success, Haylou GT7 Pairing complete!

Put the earbuds back to the charging case and repeat the above operation if the connection fails.

After the first connection. the earbuds can be automatically connected to the last paired device( Bluetooth needs to be turned on)

MFB / Charging contacts / Mic / LED / Type-C charging port

Package list: Earbuds, charging case, charging cable user manual.

Manual connection: when earbuds are turned off, manually turn on both of them Wait 2-3 seconds for them to turn on and connect to each other. Turn on device Bluetooth to connect when light on single earbud flashes white slowly
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions
may cause harmful interference to radio communications. However
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
— Reorient or relocate the receiving antenna
— Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
–Consult the dealer or an experienced radio/V technician for help
This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure
requirement in portable exposure condition without restriction

Switch between mono and stereo mode: It is stereo mode after two earbuds are successfully off. the other will enter mono mode Or pickle connected. Put one back into the case to pow up again to resume stereo mode

Haylou GT7 How to Wear

  1. Gently insert the earbud into the ear canal, adjust the earbud to the most comfortable wearing state
  2. When calling, adjust Mic 2 towards mouth to gain better talking experience

Haylou GT7 Touch Control

  1. Play/pause music: Short touch MFB button
  2. Skip track forward: Double touch right MFB button
  3. Answer/hang up incoming call : Short touch MFB button
  4. Activate voice assistant when standby Triple touch MFB button
  5. Turn on/off low latency mode: Double touch left MFB button

Answer the second call
When there is a new incoming call during a call, short touch the MFB button to hold the previous call and answer the second call. then double
touch the MFB button to switch the call hold the current call, switch to the previous call, and then short touch the MFB button to hang up the
current call and answer the call on hold

Haylou GT7 Earbuds Specs

  • Basic Parameters(earbuds)
  • Operation range: 10m (open space with no obstacle
  • Battery capacity: 35mAh(single earbud)
  • Charging time: approx 2hr
  • Talk time: approx 3hr
  • Standby time: approx 60hr
  • Input parameter: 5V=50mA
  • Battery type: li-ion
  • Bluetooth version: v5.2

Haylou GT7 charging case Specs

  • Basic Parameters(charging case)
  • Input parameter: 5V == 500mA
  • Output parameter: 5V= 100mA
  • Charging time: approx. 2hr
  • Battery capacity: 310mAh
  • Battery type: li-ion

Haylou GT7 How to Charge

  • For first time use, please remove the isolation film on the charging contacts of both earbuds
  • Then fully charge the charging case and earbuds
  • Plug in the charging cable to charge the earbuds and the charging case at the same time. The charging indicator light will be solid white when the charging case is not fully charged. The indicator light goes out after fully
  • charge

Haylou GT7 Power-off

  1. The earbuds will auto power off when put in the charging case
  2. Keep touching the MFB button for 4.5s to power off
    Keep touching for about 4.5s

Haylou GT7 Power-on

  1. Take out to auto power on when the earbuds are in case
  2. If earbuds are out of case and in power-off state, keep touching the MFB button for about 1.5s to power on
    Keep touching for about 1. 5s

Haylou GT7 Warranty Card

  • Warranty Period
  • 12 months after you purchase this item (or you may inquire your local shopper for more details.

Free service
Supposing any defects caused by quality issues
occur within the warranty period, please take
this warranty card and purchase receipts to
your distributor for free exchange service
Model number
Date of Purchasing
User s name
User’ s phone
User’ s Address
Shop s Name
Shop’ s Address
Comments

Haylou GT7 Caveats
Haylou GT7 Warning

  1. Do not disassemble, repair or modify the
    product for any reason, as this may cause fire
    or even completely destroy the product
  2. Do not expose the product to environments
    where the temperature is too low or too high
    below 0oC or above 45.C)
  3. Keep the indicators away from the eyes of
    children and animals while using the
    earphones
  4. Do not use this product during thunderstorms
    Thunderstorms may cause the product to
    malfunction and increase the risk of electric
    shocks
  5. Do not wipe and clean the earphones or their
    case with alcohol or other volatile liquids
  6. Avoid any contact with liquids

Haylou GT7 Note

  1. Please read this user manual carefully before
    using the product and please properly store
  2. When using for the first time, please full
    Charge this product
  3. Please charge the product, in case it has no
    been used over two week

Haylou GT7 FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
This device may not cause harmful interference

This device must accept any interference received, including interference that may cause undesired operation