Haylou T15 Manual
English Haylou T15 Earbuds Manual Instructions
Haylou T15 Pairing Haylou T15 Reset Touch Control Charging Case Warranty User Manual Guide
Re-Checking Earbuds Features and Specs: Haylou T15
Haylou-T15 TWS BT Earphones User Manual
Overview
Battery LED / USB output / Charging LED / Micro USB input / Pogo Pins
LED / Touch Pane / Mic
What’s in the Box
Eartips x 3 pairs, Bluetooth earphones charging case, charging cable, manual
Haylou T15 Reset
How to reset Haylou T15
Factory Setting: If earphones do not function well, please refer the following steps to reset factory:
- Take two Haylou T15 earbuds out from the charging case
- Power off the earphones first before Reset Haylou T15
- Touch both panels for about 15s (LED will blink red and
white three times twice). - After that, put Haylou T15 earbuds back to the case.
- Delete connectivity record on cellphone before processing another pair (All connectivity records relating to the earbuds will all be removed)
- If all success, Haylou T15 Reset steps complete!
Audio only outputs from single earbud
It’s really rare. Please reset Haylou T15, remove connectivity record on your cellphone and reconnect the earphones to your cellphone
Haylou T15 Pairing
How to Pairing Haylou T15
Stereo Mode Auto pairing:
- Take out both Haylou T15 Earbuds from the charging case
- They will auto pair with each other in 2 or 3s
- Earphones will be connectable to cellphone when LED on either earbud blinks white slowly
- On cellphone search for ” Haylou-T15 ” and tap to connect
- If all success, Haylou T15 Pairing steps complete!
- If earphones fail to be connected to cellphone, please put Ear Buds back to the case and repeat the above steps
Earphones will auto reconnect to the last device in connectivity records, if any
Note: earphones have been setted to factory when shipping out.
Manual pairing: manually power on two Earbuds and they will auto pair with each other when LED blinks white promptly. Then LED on the either EarBud will blink white slowly and now you can tap it on cellphone
to connect
Haylou T15 Mono mode
Auto pairing: take out one Earbud from the case to power on it. Its LED will soon blink slowly then search for Haylou-T15 on cellphone and tap to connect earbud will auto reconnect to last device in connectivity records, if any
Note: it may take more time for the left earBud to reconnect
Manual pairing: manually power on one EarBud. Its LED will soon blink white slowly then search for Havlou-T15 on cellphone and tap to connect
Haylou T15 Touch Control
- Skip track backward : Double touch left earbud
- Skip track forward : Double touch right earbud
- Resume playing/pause music (when standby) : Touch either earbud
- Answer/end incoming call : Touch either earbud
- Reject incoming call : Keep touching either earbud for 1s
- Activate voice assistant (when standby) : Double touch either earbud
Haylou T15 How to wear
Haylou T15 How to Use
- Please keep mic outside when calling
- When calling, adjust Mic towards mouth to gain better talking experience
Haylou T15 Power On
- Take out earphones from the case to power on them Or touch both panels for Is to power on earphones ( LED glows solid white ) when they are not in the case
- LED glows solid white
- Touch the panel for ls
Haylou T15 Power Off
- Put earphones into the case to power off them Or touch both panels for 5s to power off earphones (LED glows solid red for 2s)
- LED glows solid red for 2s
- Touch the panel for 5s
Haylou T15 How to Charge
- Prior to using, please peel off sticker covering the pogo pins and top up the earphones Sticker
Haylou T15 Earbuds Basic Parameters
- Operation range: 10m(with no obstacle
- Battery capacity: 43mAh(single earbud
- Charging time: approx. 1.5hr
- Calling time: approx 3. 5hr
- Stand by time: approx. 150hr
- Input parameter. 5v =100mA
- Battery type: li-ion
- Bluetooth version: 5.0
Haylou T15 Charging Case Specs
- Input parameter 5v=1000mA
- Output parameter: 5V=500mA
- Charging time: approx 3hr
- Stand by time: approx, 4 months
- Battery capacity: 2200mAh
- Battery type: Cylindrical Battery
Haylou T15 Earbuds LEDs on Charging Case
- Battery level LEDs
All three battery level LEDs will blink 3 times then numbers of them will glow solid for 30s according to practical battery level whenever you open or close lid.
(f you need to check battery level again, please close
and re-open the lid again.)
Low battery warning: only one LEd blinks white
Battery Level Display
Battery level LEDs - Battery level
Top-up
2/3
1/3
Low battery
Charging LED will glow solid red when charging and turn off once the case is topped up
Charging: solid red
Top up: turn off
Other cases in charging
LED glows solid white for 1 minute when earbuds
are topped up.
Carry case cannot charge earbuds, if its battery drains.
LEDs on carry case will turn off once the case is topped up. If you charge it once again, LEDs will not give any notice, which does not mean the case
is not charged
Haylou T15 Tips
- Before using the headset, please read the manual
carefully and keep it for future references - The headset need to be fully charged prior to
first-time use - If the headset is left unused for over two weeks
please recharge it periodically - Please use the chargers made by qualified
manufacturer - If the headset cannot be found by your phone
please check whether it is in pairing mode; if left
unconnected for a long while, the headset will exit
pairing mode, please re-enter the mode; if a procedure
error of your phone occurs, reboot it; if a procedure
error of the headsetoccurs reboot or reset it
Haylou T15 Warranty Period
- 12 months after purchase (please keep your receipt properly)
Free service
If any quality defects happen during the warranty period, please take the receipt and contact with your distributor for aftersales service
Following cases or any damages/defects that are not due to quality issue are not covered in the warranty defects or damages caused by natural disasters,
abnormal voltage or other environmental facts
Any unauthorized disassembly, modification or change of parts
Any damages caused by improper use of the product including soaking, corroding, falling down, squeezing or exposure to abnormal temperature or humidity
Model Number:
Date of Purchasing
Users Name
User’s Phone
User’s Address
Shop’s Name
Shop’s Address:
Comments:
Haylou T15 Caveats
- Never disassemble or modify your headset for any
reasons to avoid any damages and danger. - Do not store the headset in extreme temperatures
under O” C or over45°c) - Avoid using the indicator close to the eyes of
children or animals - Do not use this headset during a thunderstorm to avoid
irregular function and increased risk of electricshock - Do not use harsh chemicals or strong detergents to
clean the headset. - Keep the headset dry
Haylou T15 Daily maintenance
Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth after use in pursuing a longer service life
Haylou T15 FCC ID: 2AMQ6-T15
Notes: Please arrange using time properly as your hearing
may be damaged by using the device for a long time.
RoHS
MADE IN CHINA
Haylou T15 FCC Statement
This equipment has been tested and found to comply with the
imits for a Class B dig tal device, pursuant to Part 15 of the
CC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instalation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful nterference to radiocommunications
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
nterference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
ncouraged to try to correct the interterence by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
Consult the dealer or an experienced radio/ TEchnician forhdp.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, includir
interference that may cause undesired operation
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Haylou T15 Hazardous